Products

Producers of dry pasta, cereals and other bulk products pay particular attention to the packaging, since film materials must be highly puncture resistant.

To provide a good selection of packaging options for this product group, the following factors should be taken into account:

  • The environment against which the packaging is to protect the product, with the barrier properties of the appropriate material chosen on this basis.
  • Welds should be high-strength to handle the product itself (especially since this product type is dust-forming);
  • Packaging for this product type is formed on vertical form-fill-seal (VFFS) lines, so it requires a certain slipping behavior and the high-strength hot weld (aka. «Нot Tack»).
  • Dry pasta packaging should also be highly puncture resistant.
Materials & structures
  • Paper/PE

    1. Varnish finish. Thickness: 1 µm
    2. Ink. Thickness: 1 µm
    3. White paper. Thickness: 40-80 µm
    4. Transparent PE film. Thickness: 10-50 µm

    Spices, mustard, pepper, salt, sugar and granulated sugar.

    • High-strength
    • Strong, tight weld
    • Very high elasticity
    • Cost-effective
    • Excellent machinability and stable slip coefficient for filling equipment
  • BOPP/BOPP

    1. Varnish finish. Thickness: 1 µm
    2. Ink. Thickness: 1 µm
    3. White/transparent/MET/MAT BOPP film. Thickness: 15-30 µm
    4. Ink. Thickness: 1 µm
    5. Adhesive. Thickness: 2-4 µm
    6. Ink. Thickness: 1 µm
    7. Transparent/MET BOPP film. Thickness: 15-35 µm

    Salt, sugar, granulated sugar and bulk products (cereals, dry pasta, vermicelli, starch).

    • Superior barrier performance
    • Allows for interlayer printing, helping ink layers stay intact throughout processing
    • Outstanding packaging strength and highly puncture resistant
    • Highly water vapour resistant
    • Matte finish available
    • Higher output along with more flexible weight (based on expanded structure)
    • High barrier performance against gases
    • Low moisture permeability
    • Protection from direct sunlight
    • High protection from aromas and odours
    • Allows for inert gases within the package itself
  • BOPP/PP

    1. Transparent BOPP film. Thickness: 20 µm
    2. Ink. Thickness: 1 µm
    3. Adhesive. Thickness: 2-4 µm
    4. Transparent/MET PP film. Thickness: 20-30 µm

    Salt, sugar, granulated sugar and bulk products (cereals, dry pasta, vermicelli, starch).

    • High-strength
    • Strong, tight weld
    • Very high elasticity
    • Cost-effective
    • Excellent machinability and stable slip coefficient for filling equipment
  • BOPP/PE

    1. Transparent BOPP film. Thickness: 20 µm
    2. Ink. Thickness: 1 µm
    3. Adhesive. Thickness: 2-4 µm
    4. White/transparent PE film. Thickness: 30-75 µm.

    Salt, sugar, granulated sugar and bulk products (cereals, dry pasta, vermicelli, starch).

    • High barrier performance
    • Attractive shelf appearance (gloss, etc.)
    • High-strength
    • Interlayers do not lose integrity when exposed to friction or low temperatures
    • Excellent machinability and stable slip coefficient for filling equipment
    • High weld strength at low temperatures and during pouch-formation (hot tack)
    • Puncture resistant
  • PET/PE

    1. Transparent PET film. Thickness: 12 µm
    2. Ink. Thickness: 1 µm
    3. Adhesive. Thickness: 2-4 µm
    4. Transparent PE film: 30 - 100 µm

    Spices, mustard and pepper.

    • High barrier performance
    • Attractive shelf appearance (gloss, etc.)
    • High strength
    • Interlayers do not lose integrity when exposed to friction or low temperatures
    • Excellent machinability and stable slip coefficient for filling equipment
    • High weld strength at low temperatures and during pouch-formation (hot tack)
    • Puncture resistant
  • Paper/PE/Foil/PE

    1. Varnish finish. Thickness: 1 µm
    2. Ink. Thickness: 1 µm
    3. White paper. Thickness: 40-50 µm
    4. Adhesive (PE melted on extrusion laminator). Thickness: 2-4 µm
    5. MET/AlOx. Thickness: 0,05 µm
    6. MET foil. Thickness: 7 µm

    Salt, sugar, granulated sugar and bulk products (cereals, dry pasta, vermicelli, starch).

    • High-strength
    • Strong, tight weld
    • Very high elasticity
    • Cost-effective
    • Excellent machinability and stable slip coefficient for filling equipment
  • BOPP/Paper/PE

    1. Transparent BOPP film. Thickness: 15-20 µm
    2. Ink. Thickness: 1 µm
    3. Adhesive. Thickness: 2-4 µm
    4. White paper. Thickness: 30-80 µm
    5. Transparent PE film. Thickness: 10-50 µm

    Spices, mustard and pepper.

    • High-strength
    • Strong, tight weld
    • Very high elasticity
    • Cost-effective
    • Excellent machinability and stable slip coefficient for filling equipment

Contact Details

If you have any questions we would be happy to answer them.

Sales Department +7 (843) 567-58-50, 212-53-53 (доб. 2127) salesgroup@danaflex.ru Marketing Department +7 (843) 567-58-50
(ext. 2701)
marketing@danaflex.ru

Ask a question

CAPTCHA